Concrete Worktop Wet Polishing Diamond Disc Kit

(4) SKU —

From £90.99 ex-VAT

In stock

This is a starter kit designed for polishing concrete or concrete worktops to a high shine. We’re asked for this combination of product so often it made sense to put together a ready made kit to save you trawling through the site picking the individual components.

Delivery: Delivery is priced at checkout
Stock: Stock level read live from the warehouse
Advice: Spec advice on 0203 130 1720

Bundle deal

Buying a few bits? A kit works out cheaper.

See all kits

Electroplated Holesaw Package

(1)

£40.99+VAT View

Concrete Grinding Kit

(2)

£182.99+VAT View

The following set is available in 100mm or 125mm diameters and includes one of each of the following products:

30# Copper Diamond Disc – Ideal for smoothing trowelled concrete, removing laitance or for exposing aggregate by removing up to 1mm to 2mm from the surface of your concrete
50# Copper Diamond Disc – For smoothing out the concrete and removing the scratch pattern left by the 30# disc
100# Copper Diamond Disc – For smoothing out the concrete and removing the scratch pattern left by the 50# disc
200# Copper Diamond Disc – This grit disc will leave a “honed” surface, flat, smooth to the touch but not glossy. Often described as an “industrial look”

At this stage, any densifiers or chemical sealers/impregnators should be applied to the concrete. Also if there are any holes that require filling then now’s the time to apply the slurry mix. (Sorry we don’t sell the chemicals)

400# Copper Diamond Disc – This is the first stage of polishing, and you should start to see a satin finish appear on the surface
800# Premium Wet Diamond Disc – You should now be seeing a polish and clear light reflections in the surface of the concrete
1500# Premium Wet Diamond Disc – Depending on the density of your concrete mix, this may be as much shine as you can achieve and it should be quite reflective
3000# Premium Wet Diamond Disc – For very dense concrete mixes or for those looking for that “Granite like” shine
Hard Velcro Rubber Backer Pad – Accepts all the discs listed above and has an M14 thread fitting for direct connection to most European and UK polishing machines. Flexible and semi rigid backers are available if you have internal curves to polish such as undermount sinks – just ask

All these products are designed to be used wet, the water acts as a coolant to stop the discs overheating (and burning out) and also helps remove the waste product as it’s cut from the top of the concrete.

The ideal working speed for the discs is circa 2000 – 4000rpm. If you need a polishing machine or need advice about polishing machines feel free to call on the number at the top of the page.